What is the blade size and what materials can this saw cut?

This saw uses a 14-inch blade, which provides approximately 4 to 5 inches of cutting depth depending on the blade arbor. It's designed for cutting concrete, brick, block, pavers, asphalt, stone, and masonry materials. The 14-inch size is ideal for control joint cutting, slab work, and small demolition projects.

What does wet or dry operation mean?

This saw can operate in two modes: wet cutting uses water to cool the blade and eliminate dust, while dry cutting operates without water. According to the listing, the saw works better and is easier on the blade when used wet, as water keeps the blade cool, extends blade life, and prevents dust from becoming airborne. Dry cutting is faster for short cuts but produces significant dust and causes more blade wear.

What is Cushion Cut and why does the listing mention Husqvarna?

Cushion Cut was an American concrete saw manufacturer that was acquired by Husqvarna in 2006. This means parts, blades, and service information for older Cushion Cut saws can often be found through Husqvarna dealers and parts suppliers. The brand had a strong reputation for building durable, professional-grade concrete cutting equipment.

What type of blade arbor does this saw have?

Most 14-inch concrete saws use a standard 1-inch arbor (with a 20mm bushing option). This is the industry standard size, which means replacement blades are readily available from multiple manufacturers. Diamond blades for this size typically range from $30 to $150 depending on quality and intended use.

What power source does this saw use?

Based on the Cushion Cut brand history, this is most likely a gas-powered saw. Gas-powered 14-inch concrete saws typically use 2-stroke or 4-stroke engines ranging from 5 to 15 horsepower. The listing mentions it runs strong, indicating the engine is in good working condition.

How deep can this saw cut in a single pass?

With a 14-inch blade, the maximum cutting depth is typically 4 to 5 inches, though the safe cutting depth depends on the blade type and material hardness. For best results and blade longevity, it's recommended to cut no more than 1 to 2 inches deep per pass, especially in reinforced concrete.

Is this saw suitable for professional use or just residential projects?

This saw is described as professional-grade and durable, making it suitable for both professional contractors and serious DIY users. It's ideal for flatwork contractors, masons, landscapers doing hardscape work, and finishers who need to cut control joints in concrete slabs. The older, well-maintained design suggests proven reliability.

What routine maintenance does a concrete saw require?

Key maintenance includes: cleaning the saw after each use to remove concrete slurry, checking and cleaning the air filter (daily for dry cutting, weekly for wet cutting), inspecting and lubricating blade shaft bearings, checking belts and drive components, replacing spark plugs and fuel filters every 40-50 hours of use, and ensuring the water delivery system is clean and functioning if using wet cutting.

Where can I find replacement parts for an older Cushion Cut saw?

Since Husqvarna acquired Cushion Cut, many parts are available through Husqvarna dealers and authorized service centers. Universal parts like blades, belts, spark plugs, and air filters can be found at equipment suppliers. Online retailers like Blades Direct and Saw Salvage also carry parts for older concrete saws. Some parts may need to be cross-referenced with Husqvarna equivalents.

How often should I replace the blade?

Blade life depends on usage and material. Diamond blades can last from 5 to 50 hours of cutting depending on the hardness of material being cut. Signs that a blade needs replacement include: slow cutting speed, excessive vibration, visible segment wear, overheating during cuts, and chipped or damaged segments. Using water extends blade life significantly.

How much does a 14-inch concrete saw typically weigh?

Most 14-inch gas-powered concrete saws weigh between 25 and 35 pounds, making them portable but substantial. The weight distribution and handle design are important for comfortable operation. This size is manageable for one person to carry and transport in a truck or trailer.

What safety equipment do I need to operate this saw?

Required safety equipment includes: safety glasses or face shield, hearing protection (gas saws are loud, typically 95-110 decibels), dust mask or respirator (especially for dry cutting), work gloves with good grip, steel-toed boots, and long pants to protect from flying debris. For wet cutting, water-resistant gloves are recommended.

What's a fair price for a used 14-inch concrete saw in good condition?

The asking price is $2,000, which is reasonable for a well-maintained professional saw. New 14-inch concrete saws range from $1,500 to $3,500 depending on brand and features. For comparison, this price point reflects the saw's older vintage balanced against its reported good condition and reliability. Husqvarna K970 models (similar capacity, newer) sell for $1,800-$2,500 used.

Should I test the saw before purchasing?

Yes, absolutely. Request to see the saw start and run. Listen for smooth engine operation without excessive smoke or unusual noises. Check that the blade spins freely without wobble. Test the throttle response. If possible, make a test cut to verify cutting performance. Inspect for cracks in the housing, damaged guards, or excessive wear on handles and controls.

What additional items will I need to start using this saw?

You'll need: appropriate diamond blade for your cutting application ($40-$150), water source and hose for wet cutting (5-gallon bucket minimum), fuel and oil mix (if 2-stroke engine), safety equipment mentioned above, and possibly a cart or saw stand for easier handling. Budget an additional $150-$300 for these accessories if starting from scratch.