Featured
❮ Main image ❯
Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail Thumbnail
1/19

Somero S-485 Laser Screed 10ft Head 46-HOURS DEMO UNIT

Concrete Placing and Finishing Equipment Laser Screeds
$92,000.00 USD
Negotiable
449

Send a Message to the Tool-Co

This field is for validation purposes and should be left unchanged.
Consent

Calculator Icon

Gearhead Finance

Flexible Financing for all types of equipment.

Apply Now
Inspection Icon

Pre-Buy Inspection Services

Check now
Lock Icon

Pricing & Features

Check now

General Details

  • address
    Location

    Elmwood Park ,07407

  • brand
    Make

    Somero

  • model
    Model

    S-485

  • year
    Year

    2017

  • condition
    Condition

    Used

Description

Somero S-485 with 10ft screed head. 46 hours. Gas Honda engine. Comes with everything you need to get started today as pictured. Can ship anywhere as buyers expense. Description and specifications in the FAQ below. Additional information in manufacturer's website
ID: 24974
Date: 11.26.2025
T
TOOL-CO
Calculator Icon

Gearhead Finance

Flexible Financing for all types of equipment.

Apply Now
Inspection Icon

Pre-Buy Inspection Services

Check now
Lock Icon

Pricing & Features

Check now

FAQ

What are the basic specifications of the Somero S-485 Laser Screed? +

The Somero S-485 Laser Screed is a ride-on, four-wheel drive laser screed with the following specifications:

  • Weight: 1,107 lbs (502 kg)
  • Width: 8’4″ (2.5 m)
  • Height: 4’2″ (1.3 m)
  • Length: 9′ (2.7 m)
  • Engine: Honda GX630, 20.8 HP (15.5 kW), gasoline-powered
  • Screed Head Options: 8-foot or 10-foot hydraulic vibrating head

This particular demo unit comes with a 10-foot head and has only 46 operating hours.

What control system does the Somero S-485 Laser Screed use? +

The Somero S-485 Laser Screed features Somero’s OASIS Laser Control System, which can operate in three modes:

  • Laser Mode: Uses laser transmitters for precise elevation control
  • 3D Mode: Integrates with 3D profiling systems for complex grade designs
  • Sonic Mode: Uses sonic sensors as a reference system

The control system also includes automatic valve calibration for consistent performance and the Somero Quick GradeSet System for fast and efficient setup.

What is the drawbar pull capacity of the Somero S-485 Laser Screed? +

The Somero S-485 Laser Screed, manufactured by Somero, has a rated drawbar pull of approximately 700 lbs, providing substantial pulling power for screeding through concrete or performing raking operations.

This level of drawbar pull makes the Somero S-485 Laser Screed well suited for handling a wide range of concrete slumps and challenging jobsite conditions.

How much productivity increase can I expect with the 10-foot head on the Somero S-485 Laser Screed? +

Using the 10-foot hydraulic screed head on the Somero S-485 Laser Screed can increase productivity by approximately 20% compared to the 8-foot head.

The hydraulic vibrator on the Somero S-485 Laser Screed is more responsive to varying concrete slump types and delivers more consistent floor quality than traditional vibration systems, helping improve both speed and finish quality.

What types of concrete work can the Somero S-485 Laser Screed handle? +

The Somero S-485 is a versatile machine capable of performing multiple types of concrete-related work:

  • Concrete Screeding: Suitable for both on-grade slabs and elevated deck applications
  • Laser-Controlled Raking: Levels freshly placed concrete using three Quick Pass settings
  • Fine Grading: Prepares subbase materials prior to concrete placement
  • Specialized Applications: Performs effectively over chaired rebar, wire mesh, ice rinks, in-floor heating systems, and freezer slabs

Can the Somero S-485 Laser Screed handle elevated deck pours? +

Yes, the Somero S-485 is designed to screed both on-grade applications and elevated deck pours, including level and cambered surfaces.

This Laser Screed is equipped with a Self-Leveling Head System (SLS), which automatically maintains the correct grade throughout the screeding operation, ensuring consistent elevation control across elevated decks.

What size projects is the Somero S-485 Laser Screed best suited for? +

This laser screed is best suited for medium-sized concrete projects where maneuverability and precision are key priorities.

With its compact footprint of 8 ft 4 in (2.5 m) wide, the S-485 can operate efficiently in tighter spaces compared to larger boom screeds, while still delivering professional-grade accuracy and high-quality floor finishes.

Common applications include:

  • Warehouse floors
  • Commercial building slabs
  • Retail spaces
  • Industrial facilities
  • Parking structures

Is the Somero S-485 Laser Screed suitable for outdoor work or just indoor applications? +

The Somero S-485 is well suited for both indoor and outdoor concrete applications. Its four-wheel drive system provides excellent traction across a variety of surfaces, and the Somero S-485 can screed in any direction, making it highly adaptable to changing jobsite conditions.

However, like all laser screeds, the Somero S-485 delivers the best precision when weather conditions do not interfere with laser reception, such as excessive rain, fog, or direct laser disruption.

What maintenance is required for the Somero S-485 Laser Screed? +

The S-485 Laser Screed, manufactured by Somero, is designed for straightforward and routine maintenance to ensure long-term performance and reliability.

Key maintenance requirements for the Somero S-485  include:

  • Regular engine servicing in accordance with Honda GX630 manufacturer guidelines
  • Routine hydraulic system inspections and scheduled fluid changes
  • Lubrication of all moving components following Somero’s recommended maintenance schedule
  • Cleaning and inspection of the screed head and hydraulic vibrator
  • Checking tire pressure and monitoring tire condition

Somero provides detailed maintenance schedules and service documentation for all models. With only 46 hours of operation on this demo unit, the Somero S-485 is barely broken in and requires minimal immediate maintenance beyond standard inspections.

Where can I get parts and service for the Somero S-485 Laser Screed? +

Parts and service for the Somero S-485 are readily available through Somero’s established global dealer and service network.

In addition, many major components on the Somero S-485, such as the Honda engine, can be serviced by authorized local dealers that specialize in those specific components.

Somero provides comprehensive support options, including:

  • On-site technical support and operator training
  • Phone and email technical assistance
  • Detailed maintenance and lubrication schedules
  • Extended warranty and service contract options
  • Online parts ordering for fast and convenient replacement

This extensive support network helps ensure the Somero S-485 Laser Screed remains productive and well maintained throughout its service life.

How often should routine maintenance be performed on the Somero S-485 Laser Screed? +

Routine maintenance for the Somero S-485 is typically based on operating hours. While operators should always follow Somero’s official maintenance schedule for exact intervals, general maintenance practices include the following:

  • Daily: Pre-operation inspection, cleaning, and fluid level checks
  • Every 25–50 hours: Engine oil change and basic lubrication
  • Every 100 hours: More comprehensive inspection and servicing
  • Annually: Complete system inspection regardless of total operating hours

With only 46 hours of operation, the Somero S-485 is approaching its first basic service interval and remains in near-new operating condition.

What are the transportation requirements for the Somero S-485 Laser Screed? +

The Somero S-485 features compact dimensions that make it relatively easy to transport between job sites.

  • Weight: 1,107 lbs (just over half a ton)
  • Footprint: 8 ft 4 in wide × 9 ft long × 4 ft 2 in high

The Somero S-485 can be transported on a standard equipment trailer. A pickup truck with adequate towing capacity, along with a tilt-bed trailer or loading ramps, is sufficient to handle this machine safely.

As noted in the listing, shipping is available at the buyer’s expense and can be arranged to virtually any location.

What additional equipment do I need to operate the Somero S-485 Laser Screed? +

To begin operating the Somero S-485, the following equipment is required:

  • Laser Transmitter: Required for laser mode operation (included, as the listing states “everything you need”)
  • Laser Receivers: Mounted on the machine to read the laser reference plane
  • Power Source: The Honda GX630 engine is gasoline-powered, so fuel and standard starting equipment are required
  • Optional Equipment: Sonic sensors for sonic mode operation or a 3D profiling system for 3D mode applications

This demo unit of the Somero S-485 Laser Screed comes complete with everything needed to begin work immediately, with no additional mandatory equipment required.

What are the limitations of the Somero S-485 Laser Screed compared to larger models? +

While the Somero S-485 is highly versatile and efficient, it does have some limitations when compared to Somero’s larger laser screed models.

  • Pour Size: Best suited for medium-sized pours; very large slab areas may be completed more efficiently with a larger model
  • Screed Width: Maximum hydraulic screed head width is 10 feet, whereas larger models can accommodate wider screeds
  • Engine Power: The 20.8 HP engine is sufficient for most applications but may be less aggressive in very stiff or low-slump concrete mixes

The trade-off for these limitations is excellent maneuverability, reduced machine weight for elevated deck work, improved accessibility in tight spaces, and simpler transportation compared to larger laser screeds.

Is the Somero S-485 Laser Screed compatible with 3D profiling systems? +

Yes, the Somero S-485 is fully compatible with Somero’s 3D Profiler System. This capability allows the machine to follow complex three-dimensional grade designs without relying on traditional laser setup, making it ideal for applications such as sloped floors, drainage layouts, and architectural concrete with varying elevations.

The OASIS control system on the Somero S-485 integrates seamlessly with 3D technology. Please note that 3D profiling equipment is typically an additional purchase unless it is already included with the machine package.

About This Specific Unit

  • Condition: 2017 model year, demo unit with only 46 hours
  • Location: Elmwood Park, NJ 07407
  • Price: $92,000 USD (negotiable)
  • Included: Complete package with 10-foot head and all necessary equipment
  • Seller: Tool-Co
  • Contact: (201) 575-3154

This low-hour demo unit represents an excellent opportunity to acquire a nearly new Somero S-485 at a significant discount compared to new pricing.