Question 1

What are the storage capacities available for the Cemco Auxiliary Silo – Portable?

Accepted Answer

The Cemco Auxiliary Silo – Portable is available in two capacity options: 75-ton capacity holds 470 barrels or approximately 1,900 cubic feet of material, and 100-ton capacity provides additional storage for larger operations. Both models use the barrel measurement common in the cement industry, where 1 barrel equals 4 cubic feet, or roughly 300 pounds of aerated cement when pneumatically loaded.

Question 2

How long does it take to set up the Cemco Auxiliary Silo – Portable on a job site?

Accepted Answer

The Cemco Auxiliary Silo – Portable sets up in under an hour thanks to its hydraulic self-erecting system. The unit arrives as a single, self-contained load with all components pre-assembled and pre-wired. Two operators can typically complete the setup without requiring cranes or additional heavy equipment, significantly reducing mobilization costs and time.

Question 3

What type of auger system does the silo include?

Accepted Answer

The Cemco Auxiliary Silo – Portable includes a fully attached 10-inch auger that is run by a hydraulic motor. This auger system ensures smooth and efficient material transfer from the silo to your batch plant. The hydraulic motor quick-connects directly into compatible Cemco batch plants, eliminating complex installation procedures.

Question 4

What equipment is the Cemco Auxiliary Silo – Portable designed to work with?

Accepted Answer

The Cemco Auxiliary Silo – Portable integrates seamlessly with Cemco Model 300 Mobile Concrete Batch Plant (current model), Cemco Model 275 Batch Plant (previous generation), and other Cemco mobile concrete batching systems. The silo is specifically engineered to expand the storage capacity of Cemco's self-erecting batch plant line, ensuring consistent material supply for high-production operations.

Question 5

Does the Cemco Auxiliary Silo – Portable require external power to operate?

Accepted Answer

No. The Cemco Auxiliary Silo – Portable operates using hydraulic power that quick-connects to the host batch plant's hydraulic system. The batch plant itself is powered by a diesel engine (typically a John Deere unit), making the entire system self-contained and independent of external electrical sources. This makes it ideal for remote job sites or locations without reliable power infrastructure.

Question 6

Can the silo be used for materials other than cement?

Accepted Answer

Yes. While primarily designed for cement storage, the Cemco Auxiliary Silo can also store fly ash and other dry powder materials used in concrete production. The sealed design and dust collection system make it suitable for various powdered materials that require protection from moisture and contamination.

Question 7

How is the silo transported to a job site?

Accepted Answer

The Cemco Auxiliary Silo – Portable ships as a single, complete load with fixed axle system, standard fifth-wheel hookup for semi-truck towing, and all wiring and hydraulic lines pre-installed. The unit is road-legal when transported in its lowered position and does not require special permits for standard highway transport in most jurisdictions. The silo must be completely empty during transport, as the axles are rated only for the empty unit weight.

Question 8

What are the typical dimensions when the silo is in transport configuration?

Accepted Answer

While exact dimensions vary by capacity, portable cement silos in this class typically maintain legal transport dimensions: Width 8 feet 6 inches, Height (lowered) approximately 13 feet 6 inches, and Length 35-40 feet depending on configuration. These dimensions allow transport without oversize load permits in most regions, reducing mobilization costs.

Question 9

Can the silo be relocated between job sites easily?

Accepted Answer

Yes. The portable, self-erecting design makes relocation straightforward: empty the silo completely, lower the unit hydraulically using the self-erecting system in reverse, secure all components for transport, tow to the new location using a standard fifth-wheel tractor, and set up at the new site in under an hour. This mobility is a key advantage for contractors working on multiple projects or moving operations as work progresses.

Question 10

Is a hydraulic leveling kit necessary for all installations?

Accepted Answer

Not always, but it's recommended for uneven terrain. The optional hydraulic leveling kit allows precise positioning on job sites with sloped surfaces, uneven ground conditions, or variable site topography. For relatively flat, prepared surfaces, the standard setup may be sufficient. The leveling system ensures proper material flow and structural stability when ground conditions are less than ideal.

Question 11

What foundation or ground preparation is required?

Accepted Answer

The silo is designed for temporary, mobile installations and does not require a permanent concrete foundation. However, the site should provide reasonably level ground (or use the optional leveling kit), stable, compacted surface to support the loaded weight, adequate clearance for setup and truck access, and proper drainage to prevent water accumulation around the base. The silo sits on its own support structure when erected, distributing weight across the footprint.

Question 12

What routine maintenance does the auxiliary silo require?

Accepted Answer

Regular maintenance includes hydraulic system inspection (check fluid levels, hoses, and connections), auger system inspection for wear and proper lubrication, dust collection system cleaning or filter replacement as needed, safety features inspection (level indicators, emergency stops, and access ladders), structural inspection (check welds, bolts, and support components), and paint and coatings touch-up on any damaged areas to prevent corrosion. Following Cemco's maintenance schedule extends equipment life and ensures reliable operation.

Question 13

How does the quality control process work for new silos?

Accepted Answer

Each silo undergoes comprehensive testing, including setup and functional checks, before delivery. This ensures that all hydraulic systems operate correctly, the self-erecting mechanism functions smoothly, auger and material handling systems work as designed, safety features are properly installed and operational, and the unit meets Cemco's quality standards. This pre-delivery testing helps minimize startup issues when the equipment arrives at your job site.

Question 14

Can I add an auxiliary silo to an existing Cemco batch plant from years ago?

Accepted Answer

The Cemco Auxiliary Silo – Portable is designed to work with the Model 300 Mobile Concrete Batch Plant and earlier models. Compatibility with older Cemco plants is generally good, but verification is recommended. Contact Cemco at (855) 564-5855 or ConcreteIron at 817-837-9812 to confirm compatibility with your specific batch plant model and year.

Question 15

What are the primary limitations or considerations when adding an auxiliary silo?

Accepted Answer

Key considerations include space requirements (ensure adequate site space for both the batch plant and auxiliary silo), material consumption rate (match silo capacity to your production needs to avoid overfilling or frequent reloading), transport logistics (plan for delivery access and setup area), dust control compliance (verify that dust collection systems meet local environmental regulations), operator training (personnel need basic hydraulic system knowledge for setup and operation), and cement supply coordination (plan bulk cement deliveries to match your expanded storage capacity). The Cemco Auxiliary Silo – Portable significantly increases operational efficiency but requires proper planning to maximize its benefits.

Concrete Batching Equipment

Concrete Pumping Equipment

Concrete Placing & Finishing Equipment

Other Concrete Equipment

General Construction Equipment

Concrete Batching Equipment

Used 2018 Omega Rhino Volumetric Mixer on a 2004 Kenworth

Used 2009 Cementech C60 Volumetric Mixer on a Mack RD

28 Meter Schwing 2006

2024 S-15 R Laser Screed

Concrete Batching Equipment

Concrete Pumping Equipment

Concrete Placing & Finishing Equipment

Other Concrete Equipment

General Construction Equipment

Login

Concrete Batching Equipment

Used 2018 Omega Rhino Volumetric Mixer on a 2004 Kenworth

Used 2009 Cementech C60 Volumetric Mixer on a Mack RD

28 Meter Schwing 2006

2024 S-15 R Laser Screed